Original
By certification 
Bottle silicone adhesive sealant
Acid glass glue
1. It is suitable for sealing, clogging and leakage prevention, and it is suitable for both indoor and outdoor (interior effect is better), and the anti-seepage and leakage prevention effect is remarkable.
2. Bonding various interior decorations of automobiles, including: metal, fabric and organic fabrics and plastics.
3. Join the gasket on the heating and cooling equipment.
4. Add ribs, nameplates and lacquer plus plastic materials on the metal surface without screw holes.
5. Seal the window on the oven door, the flue on the gas appliance, the pipe joint, and the access door.
6. Provide instant formed leak-proof pads for gearboxes, compressors and pumps.
7. Seal the ship's warehouse and window. 8. The sealing of the glass window of the trailer and truck cab.
9. Bonding and sealing equipment components.
10. Form an anti-wear coating.
11. Inlay and fill thin metal sheet laminates, pipe network and equipment casing.
Characteristics of Silicone Sealant
Structural silicone |
1.One-part, high flexibility, neutral cure suitable for use on most construction materials. |
Neutral/ Waterproof |
1.use and extrude easily in the application of sealing, assembling, waterproofing hardware products, and hardware products, and have long-term durability. |
Acetoxy Silicone |
1.One-part, easy to apply. |
Technical details
| NO. | Item |
Technical Data |
1 |
Appearance |
Smooth paste without bubble or particles |
2 |
Available Color |
Clear;White;Black; and other special color |
3 |
Specific Gravity |
0.93 to 0.98g/ml |
5 |
Skin Time |
10-15Mins |
6 |
Full Cure Time |
18-22hours (6mm thickness) |
7 |
Tensile Strength |
≥1.0Mpa |
8 |
Elongation at break |
≥450 |
9 |
Hardness Shore A |
>28 |
10 |
Working Temperature |
-40 to 280℃ |
11 |
Extrusion Rate |
400g/min |
12 |
Shelf Life |
≥12 months (shore below 32℃) |
Supply Ability
Supply Ability: 5000 Box/Boxes per Day
Packaging & Delivery
Packaging Details
Available in Cartidges of 310gms( 24 pc/ctn) & Sausages 600gms (20 pc/ctn)
Features & Benefits
1. One-component, acetic cured, RTV, low-modulus;
2. Easy to use, fast dry, excellent adhesion to many building materials;
3. Good aging-resistant ability, high flexible;
4. Non-sagging, low shrinkage, good UV resistance & insulation properties;
5. No primer is required when sealing joints in glass, ceramics and vitreous surfaces;
Instruction of Use
1. Get rid of the rust, oil, or any dirty on the operation surfaces, to make sure it completely clean and dry;
2. Cut nozzle to desired size and smoothly extrudes sealant to joint areas;
3. If further sealing needed, should finish operation within 5 minutes. Wipe off the surplus sealant with dry tissue.
4. After completely solidify, amend by knife.
http://www.hkweatherstrip.com/
